Materiaaltesten Fundering Pressure Transducers
Pressure transducers are used for the measurement of cell pressure, back pressure, pore pressure (water or air).They have to be connected to triaxial cells by the suitable De-airing block. See accessories.
The transducers are base on the extensimetric measurement principle with strain gauges on the metal base.
Two series are available according to the compatibility with the machine, please refer to the technical specification and transducers compatibility table below.
Code | 28-WF630X | 28-WF630X/A |
Input voltage | 1-10 | 1-10 |
Output voltage | 10mV/V | 1.5 mV/V |
Resolution | infinite | infinite |
Accuracy | ±0.25 FSO | ±0.25 FSO |
Temperature [°C] | -40 to +85 | -40 to +105 |
Temperature effect*[FS/°C] | ±0.015% | ±0.01% |
Removable cable | No | Yes |
Dimensions** [lenght x dia.] | 5.8 x 2.55 | 15.2 x 2.7 |
Weight [g] | 100 | 130 |
Where:
X = 0 : 1000 kPa
X = 1 : 2000 kPa
X = 2 : 3500 kPa
* Typical thermal zero and span coefficients
** nipple included
28-WF6310: De airing block suitable for banded triaxial cells 28-WF6301/A: Pressure transducer 0-2000 kPa 28-WF6302: Pressure transducer 0-3500 kPa, not compatible with AUTOTRIAX 2 and Load frames four built-in channels ( see model 28-WF6302/A) 28-WF6302/A: Pressure transducer 0-3500 kPa 28-WF6300/A: Pressure transducer 0-1000 kPa, not compatible with DYNATRIAX ( see model 28-WF6300)
Een prangend labovraagstuk?
De oplossing is slechts een
klik van je verwijderd!
info@hilab.be
BE 0838.823.138
Openingsuren:
Ma - Vr: 08u - 17u
Za: enkel op afspraak