Materiaaltesten Fundering  Programmable Accelerated Curing Tanks

Programmable Accelerated Curing Tanks

Description

Introduction
This test method covers procedures for curing concrete specimens under conditions intended to accelerate the development of strength. Three versions available:
55-C0194/D model which cover the ASTM C684, C1768 (Procedure A, warm water method) and BS 1881:112 for 35-55°C hot water method.
55-C0194/DV similar to the above, but covering steam method. 
55-C0194/E model, covering both hot water and steam method.


Description
This special curing tanks have been designed for hot water curing or steam curing in accelerated strength concrete. The interior is made from stainless steel. The electronic programmer can control up to four test cycles with different thermal gradients and curing time to a defined temperature value for a complete automatic curing cycle. The control panel include a 28 column thermal printer.

Label/Normering

  ASTM C684‰BS 1881:112‰ASTM C1768

Technische specificaties

Technical Specifications

 C0194/D
C0194/DZ		C0194/DV
C0194/DVZ		C0194/E
C0194/EZ
Max water temperature, °C90-90
Max steam temperature, °C-100100
Temperature sensorPT 100
Heating systemThree 1500W electric resistance heaters submerged in water
Submersible circulation pump--yes
Cooling system-With mains water controlled by solenoid valve*
Temperature controlBy closed loop PID control system
Temperature curing cycleProgrammable:
-Rising time up to the selected value
-Maximum temperatur holding time		Programmable:
-Rising time up to the selected value
-Maximum temperatur holding time
-Cooling time down to ambient temperature
Power rating, W4500
Printer24 column, included
Overall dimensions, mm (w x d x h)970 x 1000 x 920
Internal dimension, mm (w x d x h)640 x 900 x 560**


* Note: cold water is supplied to the bottom of the tank in order it does not hit the specimens
** 400mm is the max height  between specimen supporting grid and water level

Order nummers

55-C0194/D: Programmable accelerated concrete curing tank for hot curing method to ASTM C684 and BS 1881:112, complete with printer. 380V, 50Hz, 3ph. 55-C0194/DV: Programmable accelerated concrete curing tank, steam method, complete with printer. 380V/50Hz/3ph

Accessoires & toebehoren

 

: 55-C0194/DVZ: Programmable accelerated concrete curing tank, steam method, complete with printer. 220V/60Hz/3ph 55-C0194/DZ: Programmable accelerated concrete curing tank for hot curing method to ASTM C684 and BS 1881:112, complete with printer. 220V, 60Hz, 3ph. 55-C0194/E: Programmable accelerated concrete curing tank, warm/hot water method,to ASTM C684 and BS 1881:112and steam method. Complete with printer. 380V/50Hz/3F 55-C0194/EZ: Programmable accelerated concrete curing tank, warm/hot water method,to ASTM C684 and BS 1881:112and steam method. Complete with printer. 220V/60Hz/3F

Contact