Materiaaltesten Fundering GYROCOMP EmS Electromechanical Gyratory Compactor
The new electromechanical GYROCOMP EmS is a fully stand-alone machine that only requires single-phase power supply and no external air compressor reducing the amount of maintenance and makes it easier to install.
Gyratory Compactors enable engineers to reproduce real world compaction conditions during road paving operations, allowing them to ascertain the compaction qualities of an asphalt mixture.
Advanced with new electromechanical technology
Light and portable GYROCOMP EmS is the ideal solution for Quality Control (QC) that can even be easily installed in mobile laboratories.
The new electromechanical actuator makes it a 100% stand-alone machine, as it only requires single-phase power supply and no external air compressor which reduces the amount of maintenance and makes it easier to install.
AASHTO T312/TP4 | ASTM D6925 | EN 12697-10 | EN 12697-31 | SHRP M002
78-PV0250/2: Hardened cylinder mould 150 mm dia complete with top and bottom plates.
78-PV0250/5: Hardened cylinder mould 100 mm dia complete with top and bottom plates.
78-PV0250/8: Hardened cylinder mould 100 mm dia. with holes for cold mix compaction. Complete with top and bottom plates
78-PV0250/10: Hardened cylinder mould 150 mm dia. with holes for cold mix compaction. Complete with top and bottom plates
78-PV0250/3: Distance piece 150 mm dia x 50 mm for low samples
78-PV0250/6: Distance piece 100 mm dia x 38 mm for low samples.
78-PV0250/4: Accessories to compact dia 100 mm specimens. Mould not included.
78-PV0250/13: Stainless steel wearing disc for 150mm dia. gyratory compactor mould
78-PV0250/14: Stainless steel wearing disc for 100mm dia. gyratory compactor mould
78-PV0250/16: Paper discs 150 mm diameter. (pack of 1000)
78-PV0250/17: Paper discs 100 mm diameter. (pack of 1000)
78-PV20/SOF: PC software, suitable for Galileo standard gyratory compactor
78-PV2520/15: Integrated work top for Gyrocomp / Gyrocomp EmS with motorized (electromechanic) specimen extruder. 230V/50-60Hz/1ph
78-PV2520/15Z: Integrated work top for Gyrocomp / Gyrocomp EmS with motorized (electromechanic) specimen extruder. 110V/60Hz/1ph
78-PV20UP4: Traceable ACCREDIA certificate conforming to EN 12697-31 Ann. B (To be specified at time of order)
78-PV0255/1: Calibrator blocks for ILS, set of two different angles, supplied with factory certificate
78-PV0250/11: Vertical force indicator, complete with 25kN load cell, base, spherical seat, load readout unit and calibration certificate
Een prangend labovraagstuk?
De oplossing is slechts een
klik van je verwijderd!
info@hilab.be
BE 0838.823.138
Openingsuren:
Ma - Vr: 08u - 17u
Za: enkel op afspraak